There are numerous different processes you can use when talking of stripping hardwood flooring. If you do not wish to handle chemical products and worry about malicious smoke, you may wish to stick with the conventional sander to strip the old finishes off the floor. However, should you be looking for an easier process that involves less cash or time, you'll be able to find many various chemical solutions that may strip your floors quickly and more cost effectively than hiring a sanding machine. There are several reasons for stripping hardwood flooring, specifically to permit you to refinish them and cause them to look like new.
Regardless of if really old, floors can be stripped down and refinished and nobody will ever be the wiser they're. Ensure that where you are going through this process that you replace any boards that are worn, rotted, or simply don't match the remainder of the floor. That way, you will get the very best after effect every single time.For stripping hardwood surfaces, you will need the following tools:
-thick, manmade stripping pad
-wide scraper
-stripping solution
-wide putty knife
-clean, absorbent rags
-large, wide paint brush
If you have not stripped hardwood flooring before, you should do a strip test on a tiny area on your hardwood surface, ideally a corner. For stripping your floor, follow these steps:
1. Pour stripping solution on the area and employing a wide paint brush, smudge the solution uniformly across the area.
2. Wait for about 30 minutes so that the stripping solution soaks through the floor.
3. Scrape the coating employing a scraper; it will come off simply if you permit adequate time for the stripping solution to penetrate through the coating.
4. Wipe off excess stripping solution with a wet rag.
5. Wipe the stripped area dry instantly.