Hardwood flooring is done in many different styles. Below is a summary of the various styles used:
1) Tongue and groove flooring: This flooring is the same as the recent equivalent of the way in which they used to make furniture pegs or dowels into holes and then tapped in. In the case of flooring, a length of wood sticks out with the plank and it is knocked into a groove of equal but a little smaller size on another plank.
All planks have a tongue on one side and a groove on the other. Flooring planks are staggered, just as laying bricks, with pieces being cut to give a natural appearance. Installing your own tongue and groove flooring is a decently simple project for the householder, if they have a few tools, some knee pads, and a bit of patience. It needs rather a lot of kneeling and squatting and cutting so a few people may need a professional to look after it for them. Before installing tongue and groove flooring, there are some things that must be removed from the room. This contains pre built furniture if you can take it down from the wall, sucking up any sawdust or mud from the sub-floor and make the outer layer of the floor all clean and smooth before starting. Red rosin paper or thin froth sheeting should be laid down on the bare floor, and taped so that it sticks up a bit on the bottoms of the walls. If you do not install an underlayment first, your floors probably squeak and moisture can dribble in and warp them. Baseboards should be installed after you have finished installing your tongue and groove flooring.
2) Parquet: It literally is a design of different colored wood pieces, laid down on a floor or made into tiles, in a symmetrical and repetitive arrangement. While preferred in the 70s, it has experienced transition with those that either want to revive their home to that period of time, or simply like the appearance of the differently colored pieces of wood. The parquet style has been employed in Europe for a considerable amount of time and even through history. If a parquet tile floor has been laid down and one piece or two get damaged from water, then those tiles can mostly get replaced. It's good to keep some spares available so that they match with the other tiles.
3) Inlaid floor patterns: Patterns in your floor need to be hand made as wood pieces have to be individually cut to fit into the pattern desired. Patterns are frequently seen in foyers. A compass pattern is great if the house has a nautical theme, or the householder just is keen on the beach or boats. A sweet inlaid floral pattern of differing kinds and colors of wood, looks good in a Victorian house's lobby. Patience is needed to cut wood pieces, in the colors you wish, and to piece them together like a jigsaw puzzle. Recommendation from a real craftsperson, or having them do it for you, could a be a smart choice. The common strategy is analogous to stained glass in a full sized pattern is drawn, and the wood pieces fitted into the pattern first, in case any mistakes are made.
4) Nail down flooring: This methodology is utilized for real hardwood as the pieces are way more serious than tongue and groove laminate. This sort of flooring has been employed since Colonial times and lasts the longest. As it is utilized in period house ,for example Victorian or perhaps Artisans, if you're replacing flooring in your period house you might need to think about employing this authentic flooring style in your house. As it does need rather more work, an expert can be called in to do it for you.